

Track Curve Left
Everyone to the right side of the wagon!
One of the most common tracks. Once you try out the junctions you will hardly get enough of these :)
You can use them to make circles, but the most awesome way is when you make a junction where train comes one way and curves back through a junction in the same direction it came from.

Click!
Features the Loligrad (TM) innovative snapping connector. Easy to connect and easy to disconnect.
Think about the environment
I have done my best to make the tracks durable and flexible. But nevertheless if things go south, a part of the connector breaks or the track breaks, you can allways try to repair it rather than throw it away and print a new one. Be creative and salvage, don't waste. At least that's what real railroad engineers would do :)
Build instructions
I would recommend that you print these in batches of 3pcs. Check the length of one piece, so if your printer cannot achieve 3pcs in a print, you might have to print two or even one per batch diagonally. Very small amount of supports is necessary here, so keep a close eye on tutorials.
Build process
Files
Important notes
- PETG recommended
- pay close attention to adhesion on the build plate - make sure you are not printing over some logos or anything else on your buildplate
- do not place more supports than necessary
- no brim
The tutorial below is the same for plain tracks (straight, curved etc..)
