Description Tools & materials Instructions

Build instructions

Building the wagon involves printing and cleaning parts, wiring and asswmbly.

Instructional videos will show a recommendation for slicing parts. But you can also find a better way while you build your own.

If you have never worked with soldering, there are great videos on YouTube to show you the basics. That should be just enough to acquire a skill to get this done.
There are also dedicated videos to wiring here so you should be covered.

For a full reference of necessary materials and tools, go to Tools & Materials.

Chasis

Files

chasis.zip

Part list

1 x chasis
1 x lid

Important notes

PLA recommended
do not place more supports than necessary
no brim

Slice the wagon chasis

Battery cradle

Files

battery-cradle.zip

Part list

1 x battery-cradle

Important notes

PETG recommended
do not place more supports than necessary
it is best to use tree support

Slice the battery cradle

General parts

Files

general-parts.zip

Part list

4 x bumper-cap
2 x connector-body
2 x connector-cap
4 x wagon-wheel
1 x wagon-wheel-base
1 x wagon-wheel-carrier

Important notes

PETG recommended
pay attention that all parts are perfectly level with the print bed while slicing
you don't have to print all general parts at once
connector body should be placed on the side
avoid brim
supports only on connectors